universal ac input protections: short circuit / overload / over voltage built-in active pfc function pwm control and regulated high power density 6.117w/cubic inch built-in remote sense function 125w with 18cfm fan 5x3 compact size model number output volts output amps ovp dc volt adjust min load( convection ) min load( 18cfm fan ) triple output pps125-3.3 3.3 volts(dc) 20 amps 3.63~4.45volts(dc) 3.13~3.46volts(dc) 0~20amps 0~25amps pps125-5 5 volts(dc) 20 amps 5.5~6.75volts(dc) 4.75~5.25volts(dc) 0~20amps 0~25amps pps125-12 12 volts(dc) 8.5 amps 13.8~16.2volts(dc) 11.40~12.60volts(dc) 0~8.5amps 0~10.5amps pps125-13.5 13.5 volts(dc) 7.5 amps 15.5~20.25volts(dc) 12.82~14.17volts(dc) 0~7.5amps 0~9.3amps pps125-15 15 volts(dc) 6.7 amps 17.25~20.25volts(dc) 14.25~15.75volts(dc) 0~6.7amps 0~8.4amps pps125-24 24 volts(dc) 4.2amps 27.6~32.4volts(dc) 22.80~25.20volts(dc) 0~4.2amps 0~5.2amps pps125-27 27 volts(dc) 3.8 amps 31.05~36.45volts(dc) 25.65~28.35volts(dc) 0~3.8amps 0~4.6amps pps125-48 48 volts(dc) 2.1 amps 57.6~67.2volts(dc) 45.60~50.40volts(dc) 0~2.1amps 0~2.6amps 125w single output with pfc function pps125 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
input specifications input voltage range 90-264vac / 127-370 volts(dc) frequency range 47-63 hz inrush current, typ: (cold start) 24amps / 230vac input current 3.3volts(dc): 1.2amps / 115vac; 0.6amps / 230vac 5volts(dc): 1.7amps /115vac; 0.75 amps / 230vac leakage current < 2ma / 240 vac power factor pf >0.93 / 230vac >0.98 / 115vac output specifications voltage and current see selection chart line regulation 0.5% load regulation 1.0% voltage tolerance (note 2) 0.2%: 3.3~15volts(dc) 1.0%: 24~48volts(dc) ripple/noise (note 1) 100mvpk-pk: 3.3~15volts (dc) 150mvpk-pk: 24~27volts(dc) 250mvpk-pk: 48volts(dc) hold up time @ fl 24ms @ 230vac 24ms @ 115vac setup, rise time @ fl 1000ms, 30ms/230vac 2000ms. 30ms/115vac over voltage protection 5.75~6.75volts: 5volts(dc) (pps125b/c/d) 3.6~4.45volts: 3.3volts(dc) (pps125a) hiccup mode, auto recover over current protection 130~160% rated output power fold back current limiting, auto-recover dc voltage adjust 4.75~5.25volts: 5volts(dc) (pps125b/c/d) 3.13~3.46volts: 3.3volts(dc) (pps125a) general specifications safety ul60950-1 tuv en60950-1 approved insulation resistance 100m? / 500volts(dc) / 25c / 70%rh emi compliance to en55011b (cispr11b) harmonic current compliance to en61000-3-2,-3 effciency 70% (pps-125-3.3) 79% (pps-125-5) 80% (pps-125-12~15) 83% (pps-125-24/27) 84% (pps-125-48) isolation 3000vac input - output 1500vac input - ground 500vac output - ground ems compliance to en61000-4-2,3,4,5,6,8,11; env50204, en55024, light industry level, criteria a environmental specifications oper. temperature -20c to +70c (see derate curve) storage temperature -40c to +85c, 10~95% rh relative humidity 20 to +90% rh temperature coeffcient 0.05% / c (0-50c) mtbf 111.7khrs min, mil-hdbk-217f (25c) vibration 10~500hz, 2g10min./1cycle, period for 60min. each along x, y, z axes physical specifications size millimeters 127 x 76.2 x 34.6 inches 5 x 3 x 1.36 weight 13.05 oz (370g) note 1. ripple and noise are measured at 20mhz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor. 2. tolerance: includes set up tolerance, line regulation and load regula - tion. 3. heat sink hs1,hs2 & hs3 can not be shorted. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted 125w single output with pfc function pps125 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
125w single output with pfc function pps125 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
125w single output with pfc function pps125 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|